DEVCON CORP -- CONCRETE PRIMER RESIN -- 8010-00F027515
=====================  Product Identification  =====================

Product ID:CONCRETE PRIMER RESIN
MSDS Date:04/25/1990
FSC:8010
NIIN:00F027515
MSDS Number: BQZRB
=== Responsible Party ===
Company Name:DEVCON CORP
Address:30 ENDICOTT ST
City:DANVERS
State:MA
ZIP:01923-3753
Country:US
Info Phone Num:508-777-1100
Emergency Phone Num:508-777-1100
CAGE:16059
=== Contractor Identification ===
Company Name:DEVCON CORP
Address:30 ENDICOTT ST
Box:City:DANVERS
State:MA
ZIP:01923-3753
Country:US
Phone:1-508-777-1100
CAGE:16059

=============  Composition/Information on Ingredients  =============

Ingred Name:BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN,	       
    ARALDITE 6004, 4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN
CAS:25068-38-6
RTECS #:KD4380000
Fraction by Wt: 30-60%

Ingred Name:BUTYRIC ACID LACTONE, TETRAHYDRO-2-FURANONE, BLO	       
    BUTYRYLACTONE
CAS:96-48-0
RTECS #:LU3500000
Fraction by Wt: 1-5%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (RAT): 2,000 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INGESTION:
    GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING, & DIARRHEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: SENSITIZATION, ITCHING, SWELLING, RASH
    &/OR OTHER ALLERGY-LIKE SYMPTOMS.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA, OR OTHER SKIN
    DISORDERS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS WHILE HOLDING
    EYELIDS OPEN. SKIN: WASH W/PLENTY OF SOAP & WATER. INHALATION:
    REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF BREATHING IS DIFFICULT.
    INGESTION: DON'T  INDUCE VOMITING. GIVE VICTIM TWO GLASSES OF MILK
    OR WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TOC
Flash Point:<200F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS &
    PROTECTIVE CLOTHING. WATER MAY BE INEFFECTIVE, BUT MAY BE USED TO
    COOL CONTAINERS, DISPERSE VAPORS & FLUSH SPILLS.
Unusual Fire/Explosion Hazard:HEAT OF FIRE MAY CAUSE CONTAINERS TO
    BURST.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SCRAPE UP AS MUCH MATERIAL AS POSSIBLE & PLACE
    IN SUITABLE, LABELED CONTAINER FOR WASTE DISPOSAL. RESIDUE MAY BE
    REMOVED USING A SAFETY SOLVENT.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL, DRY PLACE W/ADEQUATE
    VENTILATION. KEEP AWAY FROM OPEN FLAME & HIGH TEMPERATURES.
Other Precautions:AVOID SKIN CONTACT & BREATHING OF VAPORS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:DUST MASKS SHOULD BE WORN DURING ANY GRINDING OR
    MACHINING PROCEDURES ON CURED RESINS. ORGANIC VAPOR RESPIRATORS MAY
    BE REQUIRED IN CONFINED AREAS.
Ventilation:GOOD GENERAL IS USUALLY ADEQUATE FOR MOST INDUSTRIAL
    APPLICATIONS
Protective Gloves:CHEMICAL RESISTANT RUBBER
Eye Protection:SAFETY GLASSES OF GOGGLES
Other Protective Equipment:LONG-SLEEVE & LONG LEG CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. PRACTICE GOOD HOUSEKEEPING PROCEDURES.
Supplemental Safety and Health
LD50 INFORMATION IS FOR BUTYROLACTONE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:400F
Spec Gravity:1.55
pH: 7
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT GRAY LIQUID W/MILD EPOXY ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & OXIDIZING AGENTS
Stability Condition to Avoid:OPEN FLAMES, SPARKS, EXTREME HEAT
Hazardous Decomposition Products:CO, CO2, ALDEHYDES, & ACIDS

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.