FIBER RESINS CORP -- EPOXY RESIN, FR-2160A, PT A  -- 8010-00N080044
<pre>=====================  Product Identification  =====================

Product ID:EPOXY RESIN, FR-2160A, PT A
MSDS Date:07/20/1993
FSC:8010
NIIN:00N080044
Kit Part:Y
MSDS Number: CFPVL
=== Responsible Party ===
Company Name:FIBER RESINS CORP
Box:4187
City:BURBANK
State:CA
ZIP:91503
Country:US
Info Phone Num:800-624-9487
Emergency Phone Num:800-228-5635;800-424-9300(CHEMTREC)
CAGE:JO534
=== Contractor Identification ===
Company Name:FIBER RESIN CORPORATION, H.B. FULLER COMPANY SUBSIDIARY
Address:20701 NORDHOFF ST
Box:City:CHATSWORTH
State:CA
ZIP:91311
Country:US
Phone:818-882-3022
CAGE:26348
Company Name:FIBER RESINS CORP
Box:4187
City:BURBANK
State:CA
ZIP:91503
Country:US
Phone:800-624-9487
CAGE:JO534

=============  Composition/Information on Ingredients  =============

Ingred Name:EPOXY RESIN
Fraction by Wt: 70-100%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SILICA GEL; (SILICA-AMORPHOUS). LD50:(ORAL,RAT) 3160 MG/KG.
CAS:112945-52-5
RTECS #:VV7310000
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3

Ingred Name:CALCIUM CARBONATE
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Ingred Name:SILICA, CRYSTALLINE - QUARTZ; (CRYSTALLINE SILICA)
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: <0.1%
OSHA PEL:N/K 
ACGIH TLV:0.1 MG/M3 RDUST

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENT 2.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:CONTACT WITH LIQUID PRODUCT
    MAY CAUSE IRRITATION. SKIN:SENSITIZER. INHALATION:VAPORS MAY CAUSE
    IRRITATION. INGESTION:HARMFUL IF SWALLOWED. CHRONIC:NO ANTICIPATED
    EFFECTS. THIS PRODUCT CONTA INS CRYSTALLINE SILICA, KNOWN TO STATE
    OF CALIFORNIA TO CAUSE CANCER OR REPRODUCTIVE DAMAGE. ADDNL (EFTS
    OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INFO:DURING NORMAL USE, MATL WILL NOT
    PRESENT AN EXPOSURE RISK. ONCE PRODUCT HAS REACHED ITS FINAL STATE
    & IS ABRADED OR DISTURBED, DUSTING & EXPOSURE MAY OCCUR.
Medical Cond Aggravated by Exposure:NO KNOWN EFFECTS ON OTHER
    ILLNESSES.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH IMMEDIATELY W/WATER FOR AT LEAST 15 MINUTES.
    CONSULT MD IF IRRITATION PERSISTS. SKIN:WASH AFFECTED AREA W/SOAP &
    WATER. LAUNDER CONTAM CLOTHING BEFORE REUSE. INHAL:REMOVE FROM
    EXPOSURE. RES TORE BREATHING IF NECESSARY. KEEP WARM & QUIET. CALL
    MD. INGEST:IF PERSON CAN SWALLOW, GIVE 1 GLASS OF WATER/MILK. DO
    NOT INDUCE VOMIT. GET IMMED MED ATTN. NEVER GIVE ANYTHING BY MOUTH
    TO UNCON PERS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>400F,>204C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
    DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:INCOMPLETE COMBUSTION CAN YIELD LOW
    MOLECULAR WEIGHT HYDROCARBONS, CARBON MONOXIDE, HYDROGEN CHLORIDE,
    PHOSGENE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR RUBBER GLOVES & WIPE UP W/ABSORBENT
    MATERIAL. RESIDUE MAY BE REMOVED W/CHLORINATED SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID SKIN CONTACT W/PRODUCT AT ALL
    TIMES. POTENTIAL SKIN SENSITIZER. VAPORS HARMFUL.
Other Precautions:CONSULT TECHNICAL DATA SHEET FOR SPECIFIC STORAGE
    INSTRUCTIONS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH APPROVED
    RESPIRATOR IF CONDITIONS WARRANT.
Ventilation:GENERAL DILUTION VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
    ANSI DESIGN CRITERIA . PREVENT CONT BY USING APPROP PROT CLOTHING.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
WASTE DISP METH:LOCAL OR PROVINCIAL AUTHORITIES FOR MORE RESTRICTIVE
    REQUIREMENTS.

==================  Physical/Chemical Properties  ==================

Spec Gravity:0.72
Appearance and Odor:THIXO PASTE, CHARACTERISTIC COLOR; NEUTRAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HYDROGEN CHLORIDE, PHOSGENE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
    REGULATIONS . TO THE BEST OF MFR'S KNOWLEDGE, THIS PROD DOES NOT
    MEET DEFINITION OF HAZ WASTE UNDER U.S. EPA HAZ WASTE REGS 40 CFR
    261. SOLIDIFY & D ISP OF IN APPRVD LANDFILL. CONSULT STATE,
    (SUPDAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.